HP Color LaserJet Enterprise flow MFP M880 — Replace a toner cartridge

Go back

Control panel walkaround
  • HP Color LaserJet flow MFP M880 control panel
Copy, scan, and Digital Send
  • Copy on both sides (duplex)
  • Send a scanned document to a network folder
  • Send a scanned document to one or more email addresses
  • Send a document to email by using the address book
  • Use Save to SharePoint®
  • Send a Fax
Guides
  • User Guide
Load trays
  • Tray 1
  • Tray 2
  • Load the 3x500-sheet trays
  • Load the 3,500-sheet high-capacity tray
Maintenance and clearing jams
  • Clear jams in Tray 1, the right door, and the fuser
  • Clear jams in Tray 2
  • Clear jams in the 3x500-sheet feeder and the lower-right door
  • Clear jams in the 3,500-sheet high-capacity input tray and the lower-right door
  • Clear jams in the document feeder
  • Clear top left door jams in the stapler/stacker
  • Clear Stapler 1 jams in the stapler/stacker
  • Clear stapler/stacker connection jams (hole-punch models only)
  • Clear top left door jams in the booklet maker
  • Clear Stapler 1 jams in the booklet maker
  • Clear front left door jams in the booklet maker
  • Clear jams in the output bin
  • Clean the scanner and white backing (M880)
  • Clean the document feeder pickup rollers and separation pad (M880)
Print
  • Print a stored job
  • Use easy-access USB printing
  • Add contacts to the address book from the product control panel
  • The product does not pick up paper
  • The product picks up multiple sheets of paper
  • Select staple and hole-punch locations
  • Automatically print on both sides (Windows)
  • Manually print on both sides (Windows)
  • Print multiple pages per sheet (Windows)
  • Select the paper type (Windows)
  • Create a stored job (Windows)
  • Adjust color settings (Windows)
Product views
  • Product front view
  • Product back view
  • Interface ports and security lock
  • Control panel view
  • Stapler/Stacker (with or without hole punch)
  • Booklet Maker (with or without hole punch)
  • Supplies walkaround
Quick Sets
  • Use a Quick Set
Supplies
  • Replace a toner cartridge
  • Staple cartridge refill
  • 200-Staple Cartridge Kit (2-pack) for Booklet Maker
  • Replace an imaging drum
  • Intermediate transfer belt (ITB)
  • Keyboard Overlay

Click the Play button to review how to replace a toner cartridge.

The product uses four colors and has a different toner cartridge for each color: black (K), cyan (C), magenta (M), and yellow (Y). The product also has four imaging drums that are separate from the toner cartridges. The toner cartridges are above the imaging drums. The toner cartridges and imaging drums are inside the front door. A toner cartridge and its associated imaging drum are replaced independently of each other. The procedure for replacing a cartridge is the same for each color.

  1. Open the front door.
  2. Grasp the handle of the used toner cartridge and pull out to remove it.
  3. Remove the new toner cartridge from its protective bag.
  4. Hold both sides of the toner cartridge and shake it up and down 5-6 times.
  5. Align the toner cartridge with its slot, and then insert the toner cartridge into the product.
  6. Close the front door.