HP Color LaserJet Enterprise flow MFP M880 — Clean the document feeder pickup rollers and separation pad (M880)

Go back

Control panel walkaround
  • HP Color LaserJet flow MFP M880 control panel
Copy, scan, and Digital Send
  • Copy on both sides (duplex)
  • Send a scanned document to a network folder
  • Send a scanned document to one or more email addresses
  • Send a document to email by using the address book
  • Use Save to SharePoint®
  • Send a Fax
Guides
  • User Guide
Load trays
  • Tray 1
  • Tray 2
  • Load the 3x500-sheet trays
  • Load the 3,500-sheet high-capacity tray
Maintenance and clearing jams
  • Clear jams in Tray 1, the right door, and the fuser
  • Clear jams in Tray 2
  • Clear jams in the 3x500-sheet feeder and the lower-right door
  • Clear jams in the 3,500-sheet high-capacity input tray and the lower-right door
  • Clear jams in the document feeder
  • Clear top left door jams in the stapler/stacker
  • Clear Stapler 1 jams in the stapler/stacker
  • Clear stapler/stacker connection jams (hole-punch models only)
  • Clear top left door jams in the booklet maker
  • Clear Stapler 1 jams in the booklet maker
  • Clear front left door jams in the booklet maker
  • Clear jams in the output bin
  • Clean the scanner and white backing (M880)
  • Clean the document feeder pickup rollers and separation pad (M880)
Print
  • Print a stored job
  • Use easy-access USB printing
  • Add contacts to the address book from the product control panel
  • The product does not pick up paper
  • The product picks up multiple sheets of paper
  • Select staple and hole-punch locations
  • Automatically print on both sides (Windows)
  • Manually print on both sides (Windows)
  • Print multiple pages per sheet (Windows)
  • Select the paper type (Windows)
  • Create a stored job (Windows)
  • Adjust color settings (Windows)
Product views
  • Product front view
  • Product back view
  • Interface ports and security lock
  • Control panel view
  • Stapler/Stacker (with or without hole punch)
  • Booklet Maker (with or without hole punch)
  • Supplies walkaround
Quick Sets
  • Use a Quick Set
Supplies
  • Replace a toner cartridge
  • Staple cartridge refill
  • 200-Staple Cartridge Kit (2-pack) for Booklet Maker
  • Replace an imaging drum
  • Intermediate transfer belt (ITB)
  • Keyboard Overlay

Clean the document feeder pickup rollers and separation pad if the document feeder does not correctly pick up pages.

  1. Lift the document-feeder latch.
  2. Open the document-feeder cover.
  3. Remove any visible lint or dust from each of the feed rollers and the separation pad using compressed air or a clean lint-free cloth moistened with warm water.

    Note: Lift up the roller assembly so you can clean the second roller.

  4. Close the document-feeder cover.