HP LaserJet Enterprise M806 — Staple cartridge refill

Go back

Control panel walkaround
  • HP LaserJet M806 control panel
Easy-access USB printing
  • Use easy-access USB printing
  • Use the staple/collate feature (optional finishing accessory)
Load the paper trays
  • Tray 1
  • Tray 2
Maintenance and jam clearing
  • Clear jams in Tray 1
  • Clear jams in Tray 2 and Tray 3
  • Clear jams in Tray 4 and Tray 5
Print
  • Select staple and hole-punch locations
Product views
  • Front view
  • Back view
  • Formatter view
  • Control-panel view
  • Stapler/Stacker (with or without hole punch)
  • Booklet maker
  • Supplies walkaround
Supplies
  • Toner Cartridge
  • Staple cartridge refill
  • 2000-Staple Cartridge Kit (2-pack) for Booklet Maker

Click the Play arrow below for instructions on removing and replacing the staple cartridge.

  1. Open the front door of the output accessory.
  2. Locate the existing staple cartridge. It is toward the top of the device.
  3. Grasp the colored handle of the installed cartridge, lift up, and then pull the cartridge out.
  4. Recycle the expired staple cartridge, and remove the new cartridge from the packaging.
  5. Grasp the replacement staple cartridge by the handle, insert it into the cartridge bay. and then press down on the handle until the staple cartridge clicks into place.
  6. Close the front door.

    NOTE: A Staple cartridge 1 very low message displays on the control panel if the staple cartridge is not seated correctly.