HP LaserJet Enterprise flow MFP M830 — Tray 1

Go back

Control panel walkaround
  • HP LaserJet flow MFP M830 control panel
Easy-access USB printing
  • Use a Quick Set
  • Use the staple/collate feature (optional finishing accessory)
Guides
  • User Guide
  • Control panel poster
  • Accessory User Guide
Load the paper trays
  • Tray 1
  • Tray 2
Maintenance and jam clearing
  • Clear jams in Tray 1
  • Clear jams in Tray 2 and Tray 3
  • Clear jams in Tray 4 and Tray 5
  • Clean the scanner and white backing (M830)
  • Clean the document feeder pickup rollers and separation pad (M830)
Print
  • Select staple and hole-punch locations
Product views
  • Front view
  • Back view
  • Formatter view
  • Control-panel view
  • Control panel poster
  • Stapler/Stacker (with or without hole punch)
  • Booklet maker
Save to SharePoint© (M830)
  • Use Save to SharePoint©
Standard scan/send features
  • Send a scanned document to one or more email addresses
  • Send a scanned document to a network folder
Supplies
  • Toner Cartridge
  • Staple cartridge refill
  • 2000-Staple Cartridge Kit (2-pack) for Booklet Maker
Supplies walkaround
  • Supplies walkaround

NOTE: To avoid jams, do not add or remove paper during printing, and do not load paper above the fill lines on the paper guides.

  1. Open Tray 1
  2. Pull out the tray extension to support the paper.
  3. Load the paper, making sure it is below the limit lines on the paper guides.
  4. Adjust the side guides so that they lightly touch the paper stack, but do not bend it.