HP Color LaserJet Managed Flow MFP E57540 — Load Trays 2, 3, 4, and 5
- Clear paper jams in Tray 1
- Clear paper jams in Tray 2
- Clear paper jams in the optional 550-sheet trays
- Clear paper jams in the right door and the fuser area
- Clear paper jams in the output bin
- Clear paper jams in the document feeder
- Control-panel view (touchscreen control panel, x model only)
- Toner cartridges
- Intermediate transfer belt (ITB) and secondary transfer roller
- Staple cartridge (M577)
- User Guide
- Control Panel Guide
- Load Tray 1
- Load Trays 2, 3, 4, and 5
The following information describes how to load paper in Tray 2 and the optional 550-sheet trays (Trays 3, 4, and 5; part number B5L34A). This tray hold up to 550 sheets of 75 g/m2 (20 lb) paper.
The procedure to load paper for the optional 550-sheet trays is the same as for Tray 2. Only Tray 2 is shown here.
Open the tray.
NOTE:Do not open this tray while it is in use.
Before loading paper, adjust the paper guides by squeezing the adjustment latches and sliding the guides to the size of the paper being used.
Load paper into the tray. Check the paper to verify the guides lightly touch the stack, but do not bend it.
NOTE:To prevent jams, adjust the paper guides to the correct size and do not overfill the tray. Be sure that the top of the stack is below the tray full indicator.
Close the tray.
The tray configuration message displays on the printer control panel.
If the paper size and type shown is not correct, select Modify to choose a different paper size or type.
For custom-size paper, specify the X and Y dimensions for the paper when the prompt displays on the printer control panel.
