HP Color LaserJet Managed E55040 — Load Tray 1

Go back

Clear paper jams
  • Clear paper jams in Tray 1
  • Clear paper jams in Tray 2
  • Clear paper jams in the optional 550-sheet trays
  • Clear paper jams in the right door and the fuser area
  • Clear paper jams in the output bin
Control panel walkaround
  • Control-panel view (4-line control panel, n and dn models only)
Customer self-repair (CSR) A assemblies
  • Toner cartridges
Customer self-repair (CSR) B assemblies
  • Intermediate transfer belt (ITB) and secondary transfer roller
Guides
  • User Guide
Load the paper trays
  • Load Tray 1
  • Load Trays 2, 3, 4, and 5
Printer views
  • Printer front view
  • Printer back view

The following information describes how to load paper and envelopes into Tray 1. This tray holds up to 100 sheets of 75 g/m2 (20 lb) paper or 10 envelopes.

CAUTION:

To avoid jams, never add or remove paper from Tray 1 during printing.

  1. Open Tray 1.

    Open Tray 1

  2. Pull out the tray extension to support the paper.

    Pull out the tray extension

  3. Spread the paper guides to the correct size, an then load paper in the tray.

    Load paper

  4. Make sure that the paper fits under the fill line on the paper guides.

    Stack-height limit

  5. Adjust the side guides so that they lightly touch the paper stack, but do not bend it.

    Adjust the guides