HP Color LaserJet Managed E55040 — Toner cartridges
- Clear paper jams in Tray 1
- Clear paper jams in Tray 2
- Clear paper jams in the optional 550-sheet trays
- Clear paper jams in the right door and the fuser area
- Clear paper jams in the output bin
- Control-panel view (4-line control panel, n and dn models only)
- Toner cartridges
- Intermediate transfer belt (ITB) and secondary transfer roller
- User Guide
- Load Tray 1
- Load Trays 2, 3, 4, and 5
- Printer front view
- Printer back view
Open the front door.
Open the front door
Grasp the handle of the used toner cartridge and pull out to remove it.
Remove the toner cartridge
Remove the new toner cartridge from its protective shell by tearing off the plastic strip and opening the package. Save all packaging for recycling the used toner cartridge.
www8.hp.com/us/en/hp-information/environment/product-recycling.html
CAUTION:To prevent damage to a replacement toner cartridge, do not expose it to light for more than a few minutes. Cover the green imaging drum if the toner cartridge must be removed from the printer for an extended period of time.
If toner gets on clothing, wipe it off by using a dry cloth and wash the clothes in cold water. Hot water sets toner into fabric.
NOTE:HP recommends responsible disposal of the defective assembly.
Recycle and unpack
Hold both ends of the toner cartridge and rock it 5-6 times.
Rock the toner cartridge
Remove the protective shield from the toner cartridge.
Remove the protective shield
Support the toner cartridge underneath with one hand while holding the cartridge handle with the other. Align the toner cartridge with its slot on the shelf, and then insert the toner cartridge into the printer.
NOTE:Avoid touching the green imaging drum. Fingerprints on the imaging drum can cause print defects.
Install a toner cartridge
Close the front door.
Close the front door
