HP LaserJet Enterprise flow MFP M830 — Staple cartridge refill

Go back

Control panel walkaround
  • HP LaserJet flow MFP M830 control panel
Easy-access USB printing
  • Use a Quick Set
  • Use the staple/collate feature (optional finishing accessory)
Guides
  • User Guide
  • Control panel poster
  • Accessory User Guide
Load the paper trays
  • Tray 1
  • Tray 2
Maintenance and jam clearing
  • Clear jams in Tray 1
  • Clear jams in Tray 2 and Tray 3
  • Clear jams in Tray 4 and Tray 5
  • Clean the scanner and white backing (M830)
  • Clean the document feeder pickup rollers and separation pad (M830)
Print
  • Select staple and hole-punch locations
Product views
  • Front view
  • Back view
  • Formatter view
  • Control-panel view
  • Control panel poster
  • Stapler/Stacker (with or without hole punch)
  • Booklet maker
Save to SharePoint© (M830)
  • Use Save to SharePoint©
Standard scan/send features
  • Send a scanned document to one or more email addresses
  • Send a scanned document to a network folder
Supplies
  • Toner Cartridge
  • Staple cartridge refill
  • 2000-Staple Cartridge Kit (2-pack) for Booklet Maker
Supplies walkaround
  • Supplies walkaround

Click the Play arrow below for instructions on removing and replacing the staple cartridge.

  1. Open the front door of the output accessory.
  2. Locate the existing staple cartridge. It is toward the top of the device.
  3. Grasp the colored handle of the installed cartridge, lift up, and then pull the cartridge out.
  4. Recycle the expired staple cartridge, and remove the new cartridge from the packaging.
  5. Grasp the replacement staple cartridge by the handle, insert it into the cartridge bay. and then press down on the handle until the staple cartridge clicks into place.
  6. Close the front door.

    NOTE: A Staple cartridge 1 very low message displays on the control panel if the staple cartridge is not seated correctly.