HP LaserJet Pro M304-M305 — Load Tray 1

Go back

Load trays
  • Load Tray 1
  • Load Tray 2
  • Load optional tray 3
Product views (HP LaserJet Pro M402, M403)
  • Printer Top, Front, Right side views
  • Printer back view
Supplies
  • Remove and replace the toner cartridge

The following information describes how to load paper in Tray 1. This tray holds up to 100 sheets of 75 g/ m2 (20 lb) paper.

CAUTION:

To avoid paper jams, never add or remove paper from Tray 1 during printing.

  1. Open Tray 1 by grasping the handles on the left and right side of the tray and pulling down.

  2. Slide out the tray extension.

  3. For long paper, flip out the tray extension to support the paper.

  4. Press down on the tab on the right paper guide, and then spread the paper guides to the correct size.

  5. Load the paper into the tray. Make sure that the paper fits under the tabs and below the maximum-height indicators.

  6. Press down on the tab on the right paper guide, and then adjust the paper guides so that they lightly touch the paper stack but do not bend the paper.

  7. At the computer, begin the printing process from the software application. Make sure that the driver is set to the correct paper type and size for the paper being printed from the tray.