HP LaserJet Enterprise MFP M630 Series — Clear staple jams in the stapling mailbox accessory
- Clear jams in the document feeder
- Clear jams in Tray 1
- Clear jams in Tray 2, 3, or 4
- Clear jams in the 1,500-sheet high-capacity input tray (Tray 5)
- Clear jams in the right door
- Clear jams in the lower-right door
- Clear jams in the duplexer and fuser
- Clear jams under the top cover and in the registration area
- Clear jams in the output bin
- Clear jams in the stapling mailbox accessory
- Clear staple jams in the stapling mailbox accessory
- HP LaserJet M630 control panel functions
- Toner cartridges
- Staple cartridge
- Control Panel Guide
- User Guide
- Load Tray 1
- Load Tray 2 and the 500-sheet trays
- Load the 1500-sheet high-capacity input tray
- Clean the scanner and white backing
- Clean the backside scanner
- Clean the document feeder pickup rollers and separation pad
- Product front view
- Product back view
- Interface ports
- Use a Quick Set
- Use Save to SharePoint®
- Send a scanned document to one or more email addresses
- Send a scanned document to a network folder
The following information describes how to clear a staple jam in the stapling mailbox accessory. When a jam occurs, the control panel displays an animation that assists in clearing the jam.
Click the Play button to view an instructional video.
Press the button to release the stapling mailbox, and slide it away from the product.
Press the latch to release the stapler door.
Open the stapler door.
Lift the green tab on the staple cartridge up, and then pull the staple cartridge straight out.
Lift up on the small lever at the back of the staple cartridge.
Remove the jammed staples.
Close the lever at the back of the staple cartridge. Be sure that it snaps into place.
Insert the staple cartridge into the stapler and push down on the green handle until it snaps into place.
Close the stapler door.
Slide the stapling mailbox toward the product until it latches in place.