HP Officejet Pro X551 — Tray 2 or optional Tray 3

Go back

Accessories and Supplies
  • Replacing the ink cartridges
Clearing jams
  • Clear jams in Tray 1 (multipurpose tray)
  • Clear jams in Tray 2
  • Clear jams in optional Tray 3
  • Clear jams in the left door
  • Clear jams in the output bin
  • Clear jams in the duplexer
Load the paper trays
  • Tray 1
  • Tray 2 or optional Tray 3
Print
  • Print tasks
  • Stored jobs
Product views
  • Product front view (X551 Series)
  • Product back view
  • Interface ports
  • Serial number and model number location
  • Control panel view (X551 Series)
  • Buttons on the Home screen (X551 Series)

Tray 2 and optional Tray 3 are standard paper trays.

Click the Play button on the video to view the steps.

  1. Pull the tray out of the product. Make sure that all packing material has been removed.
  2. Slide open the paper length and width guides.
  3. Load paper into the tray with the side to be printed on face-up. Make sure the paper is flat at all four corners.
  4. Slide the side paper width guides so that they align with the paper-size markings in the bottom of the tray.
  5. Slide the front paper length guide so that it pushes the stack of paper against the back of the tray.
  6. Push down on the paper to make sure that the paper stack is below the paper limit tabs on the side of the tray.
  7. Slide the tray into the product.