HP Officejet Pro X576 — Clear jams in the duplexer

Go back

Accessories and Supplies
  • Replacing the ink cartridges
Clearing jams
  • Clear jams in Tray 1 (multipurpose tray)
  • Clear jams in Tray 2
  • Clear jams in optional Tray 3
  • Clear jams in the left door
  • Clear jams in the output bin
  • Clear jams in the duplexer
  • Clearing jams in the document feeder HP Officejet Pro X476 and X576 MFP Series only
Fax
  • Send a Fax
Load the paper trays
  • Tray 1
  • Tray 2 or optional Tray 3
Maintenance
  • Clean the scanner
  • Clean the document feeder
Print
  • Print tasks
  • Stored jobs
Product views
  • Product front view
  • Product back view
  • Interface ports
  • Serial number and model number location
  • Control panel view
  • Buttons on the Home Screen
  1. Open the left door.
  2. If you can see the trailing edge of the sheet, remove the sheet from the product.
  3. If the paper is not visible or accessible, remove the duplexer by pulling it out with both hands. Set the duplexer aside, upright, on a piece of paper to prevent ink spills.

    CAUTION: When pulling out the duplexer, avoid making direct contact with the black cylinder to prevent ink smear on skin or clothes.

  4. Lower the platen by pressing down on the green tab. This will cause the product to try to feed the sheet through the print zone. You may need to gently pull on the sheet if it does not feed. Remove the sheet.
  5. Lift the green tab to place the platen back into its operating position.
  6. Reinstall the duplexer.
  7. Close the left door.