HP Color LaserJet Pro M252 — Load envelopes in Tray 2

Go back

HP Color LaserJet Pro M252 jam clearing
  • Clear paper jams in the single-sheet slot (Tray 1)
  • Clear paper jams in Tray 2
  • Clear paper jams in the duplexer (duplex models only)
  • Clear paper jams in the rear door and the fuser area
  • Clear paper jams in the output bin
Load paper into the single-sheet slot (Tray 1)
  • Load paper into the single-sheet priority feed slot
  • Load an envelope in the single-sheet priority feed slot (Tray 1)
Load paper into Tray 2
  • Load paper into Tray 2
  • Load envelopes in Tray 2
Supplies
  • Toner cartridges

  1. Open the tray.

    Open the tray

  2. Adjust the paper guides by sliding the guides to the size of the envelopes being used.

    Adjust the guides

  3. Load envelopes into the tray.

    Load envelopes

  4. Make sure that the envelope stack is flat at all four corners. Slide the length and width guides so that they are against the stack.

    NOTE:

    To prevent jams, do not overfill the tray. Be sure that the top of the stack is below the tray full indicator.

    CAUTION:

    Loading more than five envelopes in Tray 2 can result in jams.

    Slide guides to the envelope stack

  5. After making sure that the stack is below the tray full indicator, close the tray.

    Close the tray