HP Color LaserJet Enterprise M855 — Tray 2

Go back

Control panel walkaround
  • HP Color LaserJet M855 control panel
Load trays
  • Tray 1
  • Tray 2
Maintenance and clearing jams
  • Clear jams in Tray 1, the right door, and the fuser
  • Clear jams in Tray 2
  • Clear jams in the output bin
Print
  • Select staple and hole-punch locations
  • Use the staple/collate feature (optional finishing accessory)
  • Use easy-access USB printing
Product views
  • Product front view
  • Product back view
  • Interface ports and security lock
  • Control panel view
  • Stapler/Stacker (with or without hole punch)
  • Booklet Maker (with or without hole punch)
  • Supplies walkaround
Supplies
  • Replace a toner cartridge
  • Replace an imaging drum
  • Intermediate transfer belt (ITB)
  • Staple cartridge refill
  • 200-Staple Cartridge Kit (2-pack) for Booklet Maker
  1. Open the tray.

    Note: Do not open this tray while it is in use.

  2. Adjust the paper-length and paper-width guides by squeezing the adjustment latches and sliding the guides to the size of the paper being used.
  3. Load paper into the tray. Check the paper to verify the guides lightly touch the stack, but do not bend it.

    Note: To prevent jams, do not overfill the tray. Be sure that the top of the stack is below the tray full indicator.

    Note: If the tray is not adjusted correctly, an error message might appear during printing or the paper might jam.

  4. Close the tray.
  5. The control panel shows the tray’s paper type and size. If the configuration is not correct, follow the instructions on the control panel to change the type or size.
  6. For custom-size paper, you need to specify the X and Y dimensions for the paper when the prompt displays on the product control panel.