HP PageWide Enterprise Color 556 — Load paper to Tray 2
- Clear jams in the print zone
- Clear jams in the left door
- Clear jams in Tray 1 (multipurpose tray)
- Clear jams in Tray 2
- Clear jams in Tray 3 (accessory)
- Clear jams in the 3 x 500-sheet feeder
- Clear jams in the ink-collection unit area
- Clear jams in the output bin
- Removal and replacement: Ink cartridges
- User Guide
- Load paper to Tray 1 (multi-purpose tray)
- Load paper to Tray 2
- Load paper to Tray 3
- Load paper to the 3 x 500-sheet paper feeder
- Print from a USB flash drive
- Print product reports
- Configuring printer tray settings
- Store print jobs on the printer to print later or print privately
- Selecting the paper type (Windows)
- Remove and replace the cartridge
Load paper to Tray 2
Open the tray.
NOTE:Do not open this tray while it is in use.
Before loading paper, adjust the paper-width guides by squeezing the adjustment latches and sliding the guides to the size of the paper being used. The edge of the tray guide should line up exactly with the marking on the tray.
Adjust the paper-length guide by squeezing the adjustment latch and sliding the guide to the size of the paper being used.
Load paper into the tray. Check the paper to verify the guides lightly touch the stack, but do not bend it. For information about how to orient the paper, see
. NOTE:Do not adjust the paper guides tightly against the paper stack. Adjust them to the indentations or markings in the tray.
NOTE:To prevent jams, adjust the paper guides to the correct size and do not overfill the tray. Be sure that the top of the stack is below the tray full indicator.
Close the tray.
